Product introduction: X-02 Crystal Red Pearl
Red crystal paint, coarser particles, strong glitter, red on the front, brown on the side
Product Origin :
ChinaItem No. :
X-02Shipping Port :
GhuangZhouColor :
X-02 Crystal Red pearlProduct brand :
meishiliankeMOQ :
400 boxes
Model NO. | X-02 | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | PavCarPaint | HS Code | 320820 |
Auto Painting Glitter Noble Crystal Red Pearl Car Refinish Primer
Color characteristics of crystal red pearl car paint: red crystal paint, coarser particles, strong glitter, red on the front, brown on the side
Crystal red pearl car paint can make people strong-willed, keep calm, and have accurate judgment, so it is especially suitable for car color paint when people appear at event banquets
So do you like this car primer in Crystal Red Pearl?
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback