Product introduction: M-418 dolden sliver
Slightly reddish gold, gold on the front, darker brownish yellow on the side, good covering power, thicker particles
Product Origin :
M-418Item No. :
ChinaShipping Port :
GuangZhouColor :
M-418 golden sliverUsage :
car paintProduct brand :
meishiliankeMOQ :
400 boxesM-418 Car Paint Golden Silver Good Coverage Good Price Affordable Best Sale
Medium-coarse silver effect of MK-408: the overall appearance is yellow, the silver powder particles are relatively thick, the front and side flashes strongly, and the side is dark. Elegant gold and silver, full of extravagance, as beautiful as car paint, elegant and gorgeous, shining.
| Model NO. | M-418 | Substrate | Steel |
| Certification | ISO14001 | Tin | Matel and Plastic |
| Appearance | Liquid | Level | Finish Coat |
| Main Raw Material | Acrylic | Method | Spray |
| Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
| Shelf Life | 2Years | Qty/CTN | 12tins |
| Trademark | PavCarPaint | HS Code | 320820 |
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
| Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
|
The Mixing Ratio： (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
| Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
|
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber：1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
|
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback
français
Deutsch
italiano
русский
español
português
العربية
हिन्दी
Türkçe
IPv6 network supported