Product introduction: M-407 Fine flash white silver
Silver, medium and small particle size, front flash, side white, strong metallic feeling, slightly electroplated texture
Product Origin :
M-407Item No. :
ChinaShipping Port :
GuangZhouColor :
M-407 fine flash white silverProduct brand :
meishiliankeMOQ :
400 boxes
| Model NO. | M-407 | Substrate | Steel |
| Certification | ISO14001 | Tin | Matel and Plastic |
| Appearance | Liquid | Level | Finish Coat |
| Main Raw Material | Acrylic | Method | Spray |
| Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
| Shelf Life | 2Years | Qty/CTN | 12tins |
| Trademark | PavCarPaint | HS Code | 320820 |
Front Flash Side White Silver Powder Car Paint System Fine White Flash Silver Car Refinish Paint
Color characteristics of fine flash silver car paint: silver, medium and small particle size, front flash, side white, strong metallic feeling, slightly electroplated texture, very flickering in the sun or light.
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
| Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
|
The Mixing Ratio： (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
| Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
|
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber：1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
|
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback
français
Deutsch
italiano
русский
español
português
العربية
हिन्दी
Türkçe
IPv6 network supported