Product introduction: 205 blue phase black
The highest blackness, good hiding power, with blue phase, the first choice for vehicle spraying
Product Origin :
ChinaItem No. :
M- 205PShipping Port :
GuangzhouColor :
M-205 blue phase blackUsage :
car PrimerProduct brand :
MeisiliankePayment :
T/TMOQ :
400 boxes
Model NO. | M-205P | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | PavCarPaint | HS Code | 320820 |
Primer 2K Blue Phase Extra Black Hiding Power Hot Selling High Quality Car Paint
2K blue phase special black color characteristics: the highest blackness, good hiding power, with blue phase, the first choice for vehicle spraying
Black is a color with the lowest brightness, but it is solemn and stable. Black has a noble, stable and technological image. It is the color used in many technological products, such as TVs, cars, etc.
If you like blue-tinted cars, come and use our car primer to make your car blue-tinted black, PavCarPaint auto refinish paint.
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback