Product introduction: 223 Orange red
orange-red yellowish phase, bright and bright, high chroma, leaded chrome.
Product Origin :
ChinaItem No. :
M- 223PShipping Port :
GuangzhouColor :
M-223 Orange redUsage :
car PrimerProduct brand :
MeisiliankePayment :
T/TMOQ :
400 boxes
Model NO. | M-223P | Substrate | Steel |
Certification | ISO14001 | Tin | Matel and Plastic |
Appearance | Liquid | Level | Finish Coat |
Main Raw Material | Acrylic | Method | Spray |
Specification | 1L, 3.75L / 2L, 2.5L / 4L, 5L | Components | Resin,Solvents, Pigment &Auxiliaries |
Shelf Life | 2Years | Qty/CTN | 12tins |
Trademark | PavCarPaint | HS Code | 320820 |
Vehicle paint young orange red stylish clear 2k high quality car primer
The color characteristics of 2K orange-red car coating: orange-red yellowish phase, bright and bright, high chroma, leaded chrome.
A moderately reddish orange that is slightly redder and darker than flamingo, sour apple or burnt ochre. Also known as: orange-red, as an orange-red car coating, it is very young, fashionable, and mature, giving people a warm feeling.
So do you like this orange red car primer?
Basic information on Base Coat:
Base Coat is a paint that is suitable for use before topcoating and provides four main functions:
1. Prevent the metal surface from rusting.
2. Can be used as filling properties.
3. Provide good adhesion to the sub-layer primer and topcoat.
4. Isolate the influence of the old paint layer or primer on the topcoat, and avoid the phenomenon of absorption and reduce the gloss of the Automotive Paint
Surface Cleaning: | Use a Degreasing Cleaner to Remove Wax, Oil, and Other Impurities. |
The Mixing Ratio: (Volume Ratio) <15℃ 15-30℃ >30℃ |
1K Base Paint + Thinner 100 60-80 C-1K Kase Paint Use Quick-Dryin Type C-1K Kase Paint Use Standard Type C-1K Kase Paint Use Slow-Drying Type |
Sprsy Viscosity: | 14-16 Seconds(1 wata 2 # Cup 17±2 Seconds 25℃) |
Recommended Spray Tool and Air Pressure: R P Spray Gun: HVLP Spray Gun: |
Caliber:1.3mm Air Pressure:2.0-2.5(bar) Caliber: 1.3mm Air Pressure:1.8-2.0(bar) |
Number of Spray Layers Film Thickneen: Flash time: Rest Time: |
2-3 Level,15-25um At 23℃, Flash Dry Between Layers Layers for 5-10 Minutes After 10-15 Miuntes ,Spray the Varnish |
Customer Feedback